The above photo is a Left Swing Kit.
DoorDex 30 Display kit Includes
2 X 45" "L" Shaped Brackets (one for top and one for the bottom)
30 X Pairs of hinges that affix to sample door top and bottom
30 X Plastic Washers to fit on the lower hinges for smooth swinging.
120 X 1/2" flat head #6 Screws for mounting hinges to sample door.
16 X Washers used to prevent overdrive when mounting rails to a wall.
1 X Paper instruction manual
DoorDex Setup basic steps
Mount Brackets to Wall or Selection Center
Any size sample door will fit as long as all doors are the same height.
Attach hinges
Mount the longer pin to the top sample door and shorter pin on the bottom of the sample door.
Hang Sample Doors
Insert sample doors into the brackets and the setup is complete.
Samples can be removed simply by lifting it up and swing it outward.
Technical Specs & Highlighted Feathers
The Aluminum Brackets are 1”x1” L shaped with 8 holes to mount the bracket to the wall and 30 holes to place up to 30 Sample doors on the rack.
The brackets can be cut down to any size, using a metal grinder.
There is a 1.5" spacing between each of the 30 holes.
Sample door mounting hinges include a starter grove to allow the screws to sit flush once screwed in place.
Technical Specs & Highlighted Feathers
The original Doordex system is a Universal sample door Organizer.
The Aluminum Rails are Trimmable 1.5" spacing between holes
can be trimmed down with a metal grinder to any size.
Hinges include a starter grove to allow the screws to sit flush once screwed in place.
